Set up and pair your wearable
Connect your Listel wearable to the mobile app.
What you need
- A charged Listel wearable
- The Listel mobile app, signed in
- Bluetooth turned on, and Bluetooth permission allowed for Listel
Pair the wearable
Turn the wearable on
Switch it on. The light breathes blue while it's on and hasn't connected yet.
Scan from the app
On the Home screen, find Pair your Listel wearable and tap Scan.
Check that it connected
Open Settings → Device in the app. Your wearable appears with its battery level.
Reconnect later
The app reconnects to your paired wearable when it can. If it doesn't, tap the banner on the Home screen that says Tap to reconnect via Bluetooth.
No wearable with you?
Use your phone instead. Tap Or use your phone mic for now during setup. You can switch later from the Home screen.
Common problems
| What you see | What to try |
|---|---|
| The wearable isn't found | Check that it's on and the light is breathing blue, then keep your phone close and scan again |
| The light stays off | Charge it, then switch it on again. See charging and battery life |
| It connected but the light is dim red | It's connected but not sending audio. See power and lights |